Products Online:
  Blow-Off Valves
 
  Filter Kits
  Trumpet Kits
  Fitting Kits
  Racepro Intercoolers
  Racepro Seats
  Breather Bottles
  Fuel Filters
  Boost Controllers
  Race Mesh
  Race Carbon Sheet
  Camber Plates
  T-Shirts & Caps
  Exhaust Wrap
  Heatshield
  Gauge Pods
  Subaru Intake
  Solex Locks
   
  Bonnet Centres
  Bonnet Scoops
  Bonnet Vents
  Race Panels
  Alloy Tubes
  Silicone Tubes
   
  Body Kits:
  Subaru
  Mitsubishi
  Nissan
  Mazda
  BMW
  Ford
  Honda
  Mini
  Toyota
  Misc
   
 
  Disclaimer
Privacy Policy
Site Map
Exhaust Wrap & Heat Shield Products
All prices are in New Zealand dollars. Click here for a currency converter. For any questions regarding products please click the and send an email including the relevant part number.
Click on images to enlarge them.
 
Exhaust Wrap
  3ft Pack of 2" (RAC-EW2) NZ$ POA
  15ft Pack of 2" (RAC-EW215) NZ$ POA
  25ft Pack of 2" (RAC-EW225) NZ$ POA
Looking to gain that competitive edge? If so then exhaust wrap is for you.

It helps to retain heat in your exhaust system, increasing horsepower and reducing radiant heat damage. Wrapping the exhaust system maintains hotter exhaust gases, decreasing the density, and allowing the exhaust gas to exit the system faster! Greater exhaust scavenging is produced, thus lowering intake temperatures that means more horsepower.

Heatshield Products is the only insulation company to offer two grades of exhaust wrap-standard and premium. Both withstand 1200°F continuous and 2000°F intermittent. Other companies claim 2000°F continuous, they are either lying or have found a way to bend the laws of physics and chemistry.

Exhaust wrap is constructed of a fiberglass material; glass is good for 1000°F continuous but can be helped along to 1200°F continuous with special coatings. Our standard quality wrap has a "Vermiculite" coating and our premium has a "Silvermiculite" coating that allows them to take 1200°F continuous. Exhaust wrap may be fastened with Thermal-Tie™, hose clamps, or wire.
 
   
Withstands 1200°F Continuous, 2000°F Intermittent
Increases horsepower
Reduces under hood temperatures
Premium grade benefits-less fraying & more heat retention
All rolls 1/16" thick
   
 
 
  Exhaust Wrap
  50ft Pack of 1" Premium (301050) NZ$ POA
  100ft Pack of 1" Premium (301100) NZ$ POA
  25ft Pack of 2" Premium (302025) NZ$ POA
  50ft Pack of 2" Premium (302050) NZ$ POA
  100ft Pack of 2" Premium (302100) NZ$ POA
  100ft Pack of 4" Premium (304100) NZ$ POA
  100ft Pack of 6" Premium (306100) NZ$ POA
  50ft Pack of 1" Standard (311050) NZ$ POA
  100ft Pack of 1" Standard (311100) NZ$ POA
  50ft Pack of 2" Standard (312050) NZ$ POA
  100ft Pack of 2" Standard (312100) NZ$ POA
 
BGF Mat
  1/2" Thick (80412) NZ$ POA per foot
  1" Thick (804100) NZ$ POA per foot
 
Colored Sleeving
Add cool protection to your hot rod or custom car.

An excellent way to protect wires, fuel lines, brakes lines and more and increase your vehicles appearance. The special weave of the sleeving allows it to expand over fittings when installing and be returned to its original size.

Colored Sleeving coatings make it capable of withstanding 1200°F continuous. Rolls are 25' in length and have an adjustable inside diameter from ¼" to 7/16". Fasten using Thermal-Tie™ or hose clamp.
 
   
Withstands 1200°F continuous
Rolls are 25 feet in length
Adjustable inside diameter from ¼" to 7/16"
Enhances style and improves heat protection
Excellent for street rods and custom cars
   
 
  Red 25' Roll (203121) NZ$ POA
  Blue 25' Roll (203122) NZ$ POA
  Yellow 25' Roll (203123) NZ$ POA
  Black 25' Roll (203124) NZ$ POA
  Beige 25' Roll (203125) NZ$ POA
  Purple 25' Roll (203126) NZ$ POA
Blue Coloured Sleeving 3' (RAC-CSB) NZ$ POA
Red Coloured Sleeving 3' (RAC-CSR) NZ$ POA
Silver Coloured Sleeving 3' (RAC-CSS) NZ$ POA
Black Coloured Sleeving 3' (RAC-CSBK) NZ$ POA
Purple Coloured Sleeving 3' (RAC-CSP) NZ$ POA
Yellow Coloured Sleeving 3' (RAC-CSY) NZ$ POA
 
High-Temp Floor Mat
An excellent way to insulate against sound and heat.

Flexible construction makes it a great alternative to foam-padded insulating mats that don't bend as well. Easily fits to contours and bends making it great for insulating floorboards and fire walls. Use brass buckles to mount. Face aluminized side towards source of heat. Custom sizes available.
 
   
Withstands 500°F continuous
Quality construction
Seamed edges, that don't fray like some mats
Custom sizes available
   
 
  12" x 8" (901208) NZ$ POA
  12" x 24" (902412) NZ$ POA
  18" x 24" (902418) NZ$ POA
  24" x 24" (902424) NZ$ POA
  18" x 36" (903618) NZ$ POA
  24" x 36" (903624) NZ$ POA
  Discription Here PRICE
 
Insul-Boot
Protect your expensive plug wire sets and increase their lifetime.

Insul-Boots™ prevent misfires caused by plug-wire burnout. This helps prevent loss in performance and critical engine damage.

Double wall construction provides superior protection. Special coatings allow boots to reflect and dissipate heat. Insul-Boots™ are available in four colors-red, blue, black, beige.

They withstand 1200°F continuous. Universal design fits most boots-even 90°. Easy installation, place ring side on end of spark plug boot and slide the open end towards the wire. Size: 1” id. X 6'’.
 
   
Withstands 1200°F continuous
Universal size fits most boots-even 90°
Available in four colors-red, blue, black, beige
Easy installation
Reflects and dissipates heat
   
 
  Beige 2pcs (400200) NZ$ POA
  Red 2pcs (400201) NZ$ POA
  Blue 2pcs (400202) NZ$ POA
  Black 2pcs (400204) NZ$ POA
  Beige 8pcs (400800) NZ$ POA
  Red 8pcs (400801) NZ$ POA
  Blue 8pcs (400802) NZ$ POA
  Black 8pcs (400804) NZ$ POA
 
Red Hot Sleeving
The grandfather of high performance insulation.

This old track favorite started it all over 20 years ago. This sleeving has a red-oxide silicone covering so fraying is reduced to a minimum. The silicone covering makes it easier to clean than other types of sleeving. Excellent for brake lines, wires, cables, etc.

Material is noncombustible and resists water, fungus, and petroleum products. While the silicone covering is good for preventing fraying it limits the maximum temperature to 450°F. If you are looking for a higher temperature sleeving try our Thermal Sleeving or our Reflect-A-Sleeve™.
 
   
Withstands 450°F continuous
Sold by the foot
Rugged silicone covering
Cuts easily & cleanly
No fraying
   
 
  1/2" i.d. (235012) NZ$ POA per foot
  3/4" i.d. (235034) NZ$ POA per foot
  3/8" i.d. (235038) NZ$ POA per foot
  7/8" i.d. (235078) NZ$ POA per foot
  1" i.d. (235100) NZ$ POA per foot
  1 1/4" i.d. (235114) NZ$ POA per foot
 
Reflect-A-Boot

Aluminized material reflects radiant heat away, shielding plug boots from burn out. Protect you expensive plug wire sets and increase their life and performance.

Reflect-A-Boots™ prevent misfires caused by plug wire burn out, which may cause critical engine damage. This saves you time, money and a headache later on. Boots withstand 1100°F continuous of radiant heat and up to 500°F of direct contact.

Installation is a cinch and these boots have a universal design which allows them to fit most boots-even 90°. Size: 7/8" id. x 6"

 
   
Withstands 1100°F continuous
Universal size fits most boots-even 90°
Easy installation
Reflects radiant heat away from spark plug boots
Economical alternative to Insul-Boot™
   
 
  2pcs (410200) NZ$ POA
 
Reflect-A-Cloth
Extreme flexibility makes it ideal for many applications. Use to protect paint from blistering on body panels or to protect floor of passenger compartment from exhaust heat generated through floorboards.

Reflect-A-Cloth™ is very thin, so it won't interfere with carpet installation and is very effective. It works even better if it can be placed underneath vehicle, preventing heat from getting into interior. Place aluminized side towards source of radiant heat to shield heat away. This product withstands 1100°F of radiant heat and up to 500°F of direct heat.

Heatshield Products is the only company to offer two grades of cloth: standard and premium. Apply using high temperature glue or fasten down with screws or rivets. Bulk quantities available.
 
   
Withstands 1100°F continuous
Cuts easily
Reflects radiant heat away
Excellent for floorboards and firewall
Available in two grades: standard and premium
   
 
  Standard 54" wide (710000) NZ$ POA per foot
  Standard 36" x 40" (710040) NZ$ POA
  Heavy Duty 40" wide (740000) NZ$ POA per foot
 
Reflect-A-Shield
Reflect-A-Shield™ is the highest quality heat shield on the market.

There is not a better way to divert radiant heat away. We could pay Boeing or NASA licensing money to use their names and pass the “savings” on to you to, but we’d rather sell you a better product at a better price. We use a 1/4" thick ceramic inner pad sandwiched between heavy duty foil and bound together with a stainless steel mesh at the edges. By sewing the edges as opposed to simply folding them, we create greater flexibility and a more rugged product.

As with any aluminum insulation product, it is not designed for direct contact with exhaust systems. It is shield, not an insulator. The shield withstands 1000°F continuous radiant heat and 400°F of direct contact. It is intended for wrapping around electrical boxes, air conditioning components, or use as a catalytic converter and muffler shield. Inner pad may be cut and re-wrapped for custom sizes.

All shields may be fastened with Thermal-Tie™, safety wire, screws, or rivets. Custom sizes available.
 
   
Withstands 1000°F continuous
The best heat shield available on the market!
Reflects heat away from floor boards, electrical boxes, etc.
Semi-rigid, will hold its form
Custom sizes available
   
 
  5" x 7" (710000) NZ$ POA
  6" x 14" (710040) NZ$ POA
  14" x 20" (740000) NZ$ POA
 
Reflect-A-Sleeve
Keep your wiring, lines, and cables safe from heat.

This Sleeving is superior to the old silicone covered sleevings in two ways-insulation properties and weight. Silicone covered sleevings are merely radiant heat reducers and have a lower temperature range (only 450°F max), Reflect-A-Sleeve™ acts as a thermal barrier. Instead of reducing the amount of heat going to protected lines and wires, it actually reflects the heat away significantly reducing amount of heat damage.

Weight, there's more. Our 3' length of sleeving weighs as little as 6” of the silicone covered stuff. Even though it is weighs much less, it offers better protection. Available in a solid or hook and loop seam. Reflect-A-Sleeve™ withstands 1100°F continuous of radiant heat and 500°F continuous direct heat.
 
   
Withstands 1100°F continuous

Sold in 3 foot lengths

Shields wires, lines, and cables from heat
Cuts easily and cleanly
Custom sizes available
   
 
  3/4" i.d. x 3' (270034) NZ$ POA
  1 1/4" i.d. x 3' (270114) NZ$ POA
  3/4" i.d., Hookloop (274034) NZ$ POA
  1 1/4" i.d., Hookloop (274114) NZ$ POA
 
Relfect-A-Tape
This tape that reflects radiant heat away from wires, lines, cables, and more! It is an excellent way to insulate components without disassembly. Or, use it as a means to hold other thermal insulation in place.

It is also excellent for quick "on the go" solution to heat problems. This is a must have for your tool box! Durable cloth construction makes it longer lasting and more rugged than similar products. This tape withstands 1100°F continuous radiant heat and 500°F continuous of direct contact. Reflect-A-Tape™ cuts easily and installation is a cinch with our high temperature self adhesive backing.
 
   
Reflects radiant heat away
Withstands 1100°F continuous
Cuts easily
Self-adhesive backed
Durable material
   
 
  1 1/4" x 25' (340020) NZ$ POA
 
Starter Cover
Don't let the heat stop you from starting. Prolong your starter’s life and improve its performance.

Our starter shields help to prevent starter failure caused by overheating. Quality construction and design allow for easy installation. Simply wrap cover around starter and fasten with hook and loop fasteners. Starter removal is not necessary in most cases.

Two different sizes are available trimming is not necessary. Our heavy-duty cover is double insulated to offer greater reduction in radiant heat transfer. Our standard shields use aluminized cloth construction to reflect radiant heat away! Investing a little now can save you time and money later!
 
   
Easy installation
Prolongs starter life
Prevents starter failure caused by overheating
No trimming necessary
Custom cover and wraps available
   
 
  Heavy Duty, Most starters (500025) NZ$ POA
  Standard, Most starters (501000) NZ$ POA
  Standard, Smaller starters (501010) NZ$ POA
 
Thermal Hose Sleeving (240000)
Protect rubber hoses from radiant heat damage, increasing their life.

Use to insulate air intake tubes from radiant heat lowering your intake temperatures and increasing horsepower. Special coating allows this sleeving to reflect and dissipate heat.

Thermal Hose Sleeving is capable of withstanding 1200°F continuous, there fore it can be placed directly on source of heat. The special braid of Sleeving allows it to have an expandable inside diameter from 1 3/4" to 2 3/8". It may be fastened using Thermal-Tie™ or hose clamp.
 
   
Withstands 1200°F continuous
Reflects & dissipates heat
Expandable id. from 1 3/4" to 2 3/8"
Sold by the foot
   
 
  Thermal Hose Sleeving (240000) NZ$ POA per foot
 
Thermal Sleeving
An excellent way to protect wires, fuel lines, brakes lines, battery cables, EGR tubes, and more.

The special weave of the sleeving allows it to expand over plugs and fittings when installing. Capable of withstands 1100°F continuous heat, this sleeving is ideal for protecting components that are very close to exhaust system.

Thermal sleeving reduces radiant heat transfer and also dissipates heat. Fasten using Thermal-Tie™, Cool Foil Tape™, or hose clamp. Available in bulk.
 
   
Withstands 1100°F continuous
Protects wires and lines from heat damage
An economical alternative for insulating vital engine components
Easy installation
Available in bulk
   
 
  8pcs, 6" long (200806) NZ$ POA
  6' Roll, 1/2" i.d. (201012) NZ$ POA
  6' Roll, 3/8" i.d. (201038) NZ$ POA
  6' Roll, 1" i.d. (201072) NZ$ POA
 
Thermal Ties
Simply the best way to fasten any type of insulation, wire loom, lines, etc.

Use in any application where high strength fastener is needed. Easy to use-- no bands or buckles! Simply pull the tail end through the head and tighten. Use just like those plastic wire ties. No sharp edges, easy to handle. Low profile makes them ideal for any tight fit application.

Three different lengths to suit your needs: 8" long for diameters up to 2"; 14" long for diameters up to 4"; and 33.4" long for diameters up to 10". 304 stainless steel construction, 3/16" width, and a thickness of .010"
 
   
8" for diameters up to 2"
14" for diameters up to 4"
No cutting or buckles necessary
No sharp edges, easy to handle
304 stainless steel construction
Easy installation
   
 
  8pcs, 8" long (350008) NZ$ POA
  4pcs, 14" long (350012) NZ$ POA
 
Torch Blanket, 18" x 18" (931000)
Protect critical parts on race car while making repairs on site. This product makes it convenient to make repair welds, without disassembly and returning to shop, saving time during race prep. Our Torch Blanket is made up if silica fabric making it capable of withstanding 1800°F continuous. We have included brass grommets at the corners to make it handy to mount anywhere a quick repair is needed. This material is noncombustible and resists water, fungus, and petroleum products. May be fastened with Thermal-Tie™, hose clamps, or wire.
 
   
Withstands 1800°F continuous
Protect vital components while welding
Use grommets to mount anywhere
Excellent for on track repairs
Torch may rest directly on blanket
   
 
  Torch Blanket, 18" x 18" (931000) NZ$ POA
 
  Cool Shift Carbon Kevlar
  Double Layer (917000) NZ$ POA
  Black (917004) NZ$ POA
 
  Thermal/Sound Insulator 4' x 5' (800000)
  Thermal/Sound Insulator 4' x 5' (800000) NZ$ POA
 
  CFT Cool Foil Tape
This light weight insulating tape reflects radiant heat away from wires, lines, cables, and more.

This tape is an excellent way to insulate components without disassembly, or use it as a means to finish off other thermal insulation to prevent fraying. This product cuts easily and has a self-adhesive backing.

This is an economical alternative to other forms of heat protection. CFT™ withstands 1000°F continuous of radiant heat and up to 400°F direct contact.
 
   
Withstands 1000°F continuous
Cuts easily
Self-adhesive backed
Reflects radiant heat away
Economical insulating tape
   
 
  1" x 10' (340110)  
  2" x 10' (340210)  
 
site design by Marine Link